top of page

Bend Die Line Sheet

Center Line Radius and Grip Length by Tube Size

Auto-jet bends tube to your print or sample. This sheet lists the standard center line radius (CLR) and grip length for each tube size. Call 800-247-5391 to confirm a specification before you order.
Request a Quote Call Our Team

Material and Tooling Notes

  1. Tube is American-made steel, 16 gauge aluminized unless noted.

  2. Bends over 45 degrees, and bends on stainless, need longer grip lengths.

  3. Standard slot depth is 1-1/8".

  4. Hosebeads start at 1/4" OD.

  5. Provide XYZ coordinates for bend accuracy.

  6. More CLR and grip length options are available on single bend assemblies.

  7. Call about sizes over 6" diameter.

Tube Sizes 1.00" to 2.75"

Tube size Center line radius (CLR) Grip length

1.00" 1.00" 3.00"

1.00" 304 SS 1.00" 3.00"

1.25" 2.00" 3.00"

1.25" 304 SS 2.00" 3.00"

1.50" 2.00" 4.00"

1.50" 304 SS 2.00" 4.00"

1.75" 2.00" 4.00"

1.75" 304 SS 2.00" 4.00"

2.00" 2.00" 4.00"

2.00" 304 SS 2.00" 4.00"

2.25" 14 gauge 2.25" 3.00" or 4.00" (most used)

2.25" 304 SS 2.25" 3.00" or 4.00" (most used)

2.50" 14 gauge 3.00" 3.00" or 4.00" (most used)

2.50" 304 SS 3.00" 3.00" or 4.00" (most used)

2.50" 316 SS 3.00" 3.00" or 4.00" (most used)

2.75" 14 gauge 3.00" 3.00" or 4.00" (most used)

2.75" 304 SS 3.00" 3.00" or 4.00" (most used)

Tube Sizes 3.00" to 8.00"

CLR is center line radius. Where two or more values are listed, the most used value is marked.

  • Tube size Center line radius (CLR) Grip length

    3.00" 3.50" (most used) or 4.50" 3.00", 4.00" (most used), or 6.00"

    3.00" 304 SS 3.50" (most used) or 4.50" 3.00", 4.00" (most used), or 6.00"

    3.00" 409 SS 3.50" (most used) or 4.50" 3.00", 4.00" (most used), or 6.00"

    3.50" 4.00" (most used) or 6.00" 3.00" or 6.00" (most used)

    3.50" 304 SS 4.00" (most used) or 6.00" 3.00" or 6.00" (most used)

    3.50" 409 SS 4.00" (most used) or 6.00" 3.00" or 6.00" (most used)

    4.00" 4.50" (most used) or 6.00" 3.00", 4.50", or 6.00" (most used)

    4.00" 304 SS 4.50" (most used) or 6.00" 3.00", 4.50", or 6.00" (most used)

    4.00" 316 SS 4.50" (most used) or 6.00" 3.00", 4.50", or 6.00" (most used)

    4.00" 409 SS 4.50" (most used) or 6.00" 3.00", 4.50", or 6.00" (most used)

    4.50" 4.50" 6.00" or 8.00" (most used)

    5.00" 5.00" or 6.00" (most used) 6.00", 8.00" (most used), or 12.00"

    5.00" 304 SS 5.00" or 6.00" (most used) 8.00" (most used) or 12.00"

    6.00" 6.00" (most used) or 9.00" 14.00"

    6.00" 304 SS 6.00" (most used) or 9.00" 14.00"

    7.00" Call for details Call for details

    8.00" Call for details Call for details

Send a print or a sample and call 800-247-5391 to confirm the bend specification and lead time.

bottom of page