Pipe Thermal Wrap
Applied to Your Print or Sample
Auto-jet wraps exhaust pipe with a fiber blanket, aluminum foil tape, a fiberglass mesh sleeve, and stainless steel straps. Wrap is applied to the areas your drawing or sample calls for. The specifications below are for the materials used.
Request a Quote Call Our Team
How the Wrap Is Applied
-
Adhesive is applied to the back of the fiber blanket, and the blanket is cut to the required length.
-
The fiber blanket is applied to the circumference and length of the pipe, as required by the customer's drawings or samples.
-
Aluminum tape covers the entire insulated area of the pipe surface and extends onto bare pipe for proper adhesion.
-
A fiberglass mesh sleeve is applied over the insulated areas of the pipe, as required by the customer's drawings or samples.
-
Stainless steel straps are applied at the ends of the fiberglass mesh sleeve to secure it in place.
Material Specifications
Material Property Value
Adhesive Type Synthetic polymer
Adhesive Color Light brown
Adhesive Molten tack Medium
Adhesive Application temperature 350ºF
Fiber blanket Color White
Fiber blanket Max service temperature 2200ºF
Fiber blanket Operating temperature 2000ºF
Fiber blanket Shrinkage at 2000ºF, 24 hours 0 to 1.5%
Fiber blanket Specific heat (BTU/lb/ºF) 0.27
Fiber blanket Average fiber diameter 2 to 3 microns
Fiber blanket Density 8 lb/ft3 (128 kg/m3)
Aluminum foil tape Substrate 2.0 mil aluminum foil
Aluminum foil tape Adhesive 1.3 mil acrylic
Aluminum foil tape Tensile strength 17 lb/in
Aluminum foil tape Elongation 2.5%
Fiberglass mesh sleeve Continuous operating temperature 1200ºF max
Stainless steel clamping strap Alloy 304 stainless steel
Stainless steel clamping strap Type Ball lock
Stainless steel clamping strap Minimum loop tensile strength 300 lb
Stainless steel clamping strap Color Natural
Stainless steel clamping strap Width 0.31 in
Stainless steel clamping strap Thickness 0.010 in
Thermal Conductivity
Thermal conductivity by mean temperature.
-
Mean temperature Thermal conductivity, BTU-in/hr-ft2-ºF (W/mºK)
392ºF (200ºC) 0.35 (0.051)
752ºF (400ºC) 0.59 (0.085)
1112ºF (600ºC) 0.90 (0.13)
1472ºF (800ºC) 1.25 (0.18)
1832ºF (1000ºC) 1.73 (0.25)
Send a print or a sample and call 800-247-5391 to confirm the wrap areas and lead time. Thermal wrap adds about 3 weeks to a standard order.