V Band Clamp for School Bus Exhaust: Sizing, Fitment, and When to Replace

A V band clamp joins two flanged exhaust components, such as a turbo pipe to the turbo outlet or a DPF to its inlet pipe, and it has to match the flange size and the engine application. The clamp is a small part with a large job. When it loses tension, the joint leaks, the sensors read the wrong pressure, and a repair that looks finished comes back with soot tracks at the flange.
What a V-Band Clamp Does on a School Bus
A V-band clamp wraps around two mating flanges and draws them together as it is tightened. That makes it the clamp of choice for joints that need to come apart for service, such as the connection at the turbo and the connections around the diesel particulate filter. On a school bus those joints take engine heat and engine movement every day.
Auto-jet lists V-band clamps under the part name V-Clamp or DPF V-Clamp, and the two names describe the same style of clamp.
V-Band Clamp, Band Clamp, or U-Bolt Clamp
Each clamp style belongs to a different joint.
V-band clamp: flanged joints at the turbo and the DPF.
Band clamp: slip joints between two pipe sections. The band clamp sizing and installation guide covers sizing in full.
U-bolt and seal clamps: the exhaust clamp selection guide explains where each type belongs and why using the wrong one at a joint leads to a repeat failure.
School Bus V-Band Clamps by Engine and Bus Brand
Confirmed against the Parts collection on 2026-11-16. OE numbers are listed for cross-reference only. Call to confirm fitment by OE number before ordering.
Cummins B6.7 and L9, DPF, 12.75 inch diameter, stainless steel: DPFVCL7471 (OE 5417471, 5272750, 21C7471). This is the companion clamp to the CUMGS1772 gasket assembly.
Cummins ISB 6.7, ISC 8.3, and ISL9, and Paccar PX-6, PX-8, and PX-9, DPF, T-bolt, stainless steel: DPFVCL0212 (OE 2880212, A029E741, 4026975C1).
Cummins ISB, DPF, 2007 and up: DPFVCL95 (OE 2871861, 4965096).
Cummins ISC, DPF, 2007 and up: DPFVCL11 (OE 2871862, 4965097).
Cummins ISB, 3.5 inch V-clamp at the turbo, 2007 and up: 83VCLT (OE 0115845). Listed under Universal. The catalog prints this number in the Blue Bird, Freightliner, General Motors, and Thomas Built sections.
Blue Bird Vision, Cummins ISB02 turbo pipe: BVCL881 (OE 00100881). Printed beside the turbo pipe BVB863 on the Blue Bird Vision page.
Blue Bird, Caterpillar C7, 2007 and up: BCGIVCL (OE 00123506) and BVCLTP5 (OE 0112913).
Blue Bird, Caterpillar 3208, stainless steel: 3208VCLT.
Freightliner, Mercedes-Benz 6 cylinder, stainless steel: MERCVCL6 (OE A04-19184-000).
Freightliner, Mercedes-Benz 4 cylinder, stainless steel: MERCVCL4 (OE A04-19184-001).
IC Bus, Navistar VT365 and DT466, 2004 and up: VT365VCL (OE 3546068C2).
Navistar DT360, DT466, and T444E, 1988 and up, stainless steel: DT466VCL (OE 338614C1).
Auto-jet lists V-clamps for Ford, Chevrolet and GMC, and additional Navistar and Cummins applications as well. Some of those listings are crossover references that do not carry printed dimensions or verified fitment, so they are not repeated here. Call to confirm any clamp that is not on this list.
Signs a V-Band Clamp Has Lost Its Seal
Soot tracks at the flange. A black ring or streak around the joint marks where exhaust is escaping.
A ticking or hissing sound at the turbo or the DPF. A leak at a flange is loudest under load.
A restriction reading that does not match the filter. Exhaust escaping upstream of a DPF can change the pressure the sensors read, which is why a loose clamp can imitate a blocked filter. The post on DPF blocked symptoms on a school bus works through what to rule out first.
A clamp that is stretched, cracked, or has damaged threads. Any of these means it will not hold a tight, even seat.
What to Check When You Replace a V-Band Clamp
Match the diameter and the application. The clamp has to fit the flange it wraps, and the engine decides which one that is. The 12.75 inch DPFVCL7471 is a different part from the 3.5 inch 83VCLT.
Inspect both flanges. A clamp cannot seal a flange that is bent, pitted, or carrying old gasket material.
Replace the gasket where the joint uses one. DPFVCL7471 is the companion to the CUMGS1772 gasket assembly, and the catalog lists OE 5633335 as a service kit with two clamps and two gaskets.
Follow the OE torque specification for the joint. Auto-jet does not publish a torque value for these clamps, so use the engine or chassis manufacturer's figure.
Check the joint again after the bus has run. A joint that was sealed on the bench can settle once it has seen heat.
At the turbo, the clamp seats on a pipe matched by bus brand and engine. The school bus turbo pipe replacement guide lists those pipes with their OE numbers.
Frequently Asked Questions
What is a V band clamp on a school bus?
A V band clamp is a stainless clamp that joins two flanged exhaust components, such as a turbo pipe to the turbo outlet or a DPF to its inlet pipe. Auto-jet lists them as V-Clamps and DPF V-Clamps.
How do I size a V band clamp?
Match the clamp to the flange diameter and to the engine. Auto-jet lists V-band clamps by engine make and model and by bus brand, with diameters printed where the catalog gives them. Call to confirm by OE number if you are not sure.
Can I reuse a V band clamp?
Only if it is undamaged. Inspect the band, the threads, and the T-bolt or nut every time the joint is opened. A clamp that has stretched, cracked, or lost its threads should be replaced.
Will a DPF V-band clamp fit at the turbo?
Not without confirming. A DPF clamp such as DPFVCL7471 is 12.75 inches in diameter, and the turbo clamp 83VCLT is 3.5 inches. Size and application decide the match. Call to confirm.
Why does a joint still leak after a new clamp?
The flange, the gasket, or the seating is usually the cause. A damaged flange, a missing gasket, or a clamp that was not seated evenly will leak whatever the clamp's condition.
Get a Quote or call 800-247-5391 to identify a V-band clamp by engine, bus brand, or OE number.


